PROPAM REPAR TECHNO 5kg. mortar for reparing waterproof by PROPAMSA

Thixotropic mortar with fibres, quick setting and compensated shrinkage for reparing adn setting concrete. Waterproof.

5 kg. bag. grey color

New

6,35 EUR

-40%

10,59 EUR

PROPAM REPAR TECHNO is a mortar formulated with special hydraulic binders, very ne grain aggregates, fibres and synthetic resins, suitable for repairing and plastering concrete.

APPLICATIONS

• It can be applied both indoors and outdoors.

• Indicated for quick fixing damages in concrete elements, concrete reconstructions in corners and damaged edges, repairing peelings and breakages.

• Suitable for permanent contact with water.

PROPERTIES

It allows thicknesses of 3 to 40 mm with one single hand.

Great adherence to a large variety of concrete and masonry surfaces.

Quick hardening.

Low water permeability.

Thixotropic.

SUPPORT

The supports must be rm and resistant, clean, free of any loose particles, oils, grease, dust, paint and supercial slurries.

All degraded and not very resistant concrete is to be removed down as far as the concrete that is healthy and structurally strong.

If there are any structures affected by corrosion, they are to be uncovered down until the unaffected structure is exposed. Remove the rust from the structures and clean with a wire brush, needle pistols or sand blast to grade SA2 according to ISO 8501-1 / ISO 12944-4.

The mortar’s high pH allows the passivation of the structures. If any large-scale structural repairs are required, please address the Technical Department.

The support must be wet up to saturation point, without water collecting, before applying the mortar.

PERFORMANCE

The amount of PROPAM REPAR TECHNO is 1.5 kg/m2 per mm thickness.

Please, for more information download data sheets.

No customer comments for the moment.

Write a review

PROPAM REPAR TECHNO 5kg. mortar for reparing waterproof by PROPAMSA

PROPAM REPAR TECHNO 5kg. mortar for reparing waterproof by PROPAMSA

Related Products

Top